Operated conveyor service · We bring the machine and run it · Serving Northern Utah and Boise, IDCall or text (435) 534-6978
Beltline Conveying & Grading
Beltline telescoping conveyor placing gravel on a residential job site in Northern Utah
Northern Utah · Boise, Idaho

One Operator. 100 Yards an Hour.

Beltline tows in a remote-controlled telescoping conveyor and runs it for you. Concrete, gravel, road base, dirt, and sand placed exactly where your crew needs it, without the wheelbarrow crew or a skid steer on the finish grade.

We bring the machine and run it Set up in about 5 minutes Stout TC-50, wireless remote
100yd³/hr
Material placed per hour
60ft
Telescoping reach
240°
Boom rotation
5min
On-site setup
TJ watching the Beltline conveyor place gravel on a residential lotOperated service
The labor math

Why Pay a Crew to Haul by Hand?

Every hour your guys spend pushing wheelbarrows is an hour off the actual build. Waiting on a pump truck window costs the same way. Beltline brings one machine and one operator, places up to 100 cubic yards an hour, and your crew gets back to the work you actually bill for.

  • Replaces the wheelbarrow chain and the labor bill that comes with it
  • Reaches 60 feet over fences, walls, and forms from the street
  • Tight lots, backyards, and footings a truck cannot get to
  • No skid steer tracks or ruts across finished grade
Side by side

A Hand Crew vs. the Beltline

Wheelbarrows and a skid steer

  • Four to six bodies hauling instead of building
  • Hours to move what the belt does in minutes
  • Ruts through finish grade, sprinklers, and curbs
  • Waiting on a pump truck window for the pour
  • Wear on your own loader and your crew's backs

Beltline, operated

  • One operator on a wireless remote
  • Up to 100 cubic yards an hour, a full mixer cleared in about 15 minutes
  • Trailer stays on the street, the boom goes over the fence
  • 60 ft reach, 70 ft sling, 240° rotation, one setup covers most of a lot
  • We tow it in, set up in 5 minutes, and run it
Beltline badge on the Stout TC-50 hopperStout TC-50
The machine

Stout TC-50 Telescoping Conveyor

A towable, remote-controlled conveyor built for exactly this job. The hopper takes material straight from a dump truck, skid steer, loader, or mixer. The boom telescopes 60 feet, rotates 240 degrees, and slings material up to 70 feet, so one setup covers most of a residential lot.

ThroughputUp to 100 yd³/hr
Telescoping reach60 ft
Slinging distanceUp to 70 ft
Rotation240°
Material size4" minus
Operating height9 ft
How it works

Book It. We Handle the Material Side.

01

Tell us the job

Call or send the form: material, rough yardage, where it needs to land, and the date. You get a quote, not a sales pitch.

02

We tow in and set up

The trailer parks on the street or driveway. Outriggers down, boom out, and we are placing in about 5 minutes.

03

You keep building

Your loader feeds the hopper. We run the remote and put the material where the crew marked it. Up to 100 yards an hour.

On site

Real Jobs. Real Machine. Northern Utah.

Where we work

Serving Contractors Across Northern Utah and Boise

Beltline is based in Cache Valley and the trailer travels: down the Wasatch Front to Salt Lake and Utah County, and out to Boise and the Treasure Valley for the right job. If your job is close to one of these, call and we will tell you straight whether we can get there.

  • Cache Valley
  • Box Elder County
  • Weber County
  • Davis County
  • Salt Lake County
  • Utah County
  • Boise, Idaho
Residential street in Northern Utah with the Wasatch mountains behind the job site
Get a quote

Tell Us the Job. We Will Tell You the Price.

Material, rough yardage, site access, and the date. That is all we need to quote it. Most quotes go back within one business day, faster if the pour is soon.

Call or text(435) 534-6978
Hours

By appointment. Fall books up fast, call early.

Request a quote

Tell us what you are placing and where. We usually reply within one business day. Need it sooner? Call.

Or call (435) 534-6978. By submitting you agree to our privacy policy.

Questions contractors ask

Before You Book

What materials can you place?

Concrete (up to a 6-inch slump), gravel, road base, fill dirt, topsoil, sand, cobble, bark and mulch, and aggregate up to 4-inch minus. The machine runs everything from dirt to concrete with almost no change in setup.

How much material can it move?

Up to 100 cubic yards an hour. A full mixer can be cleared in about 15 minutes. The belt speed is variable, so we slow it down for concrete and run it fast for spreading gravel or dirt.

How far can it reach?

60 feet of telescoping reach, plus up to 70 feet of slinging distance, with 240 degrees of rotation. From one setup the machine covers most of a residential lot without moving the trailer.

Do I need to supply an operator?

No. Beltline is an operated service. We tow the machine to your site, set it up, and run it with the wireless remote. Your crew keeps building instead of hauling.

What do I need to have on site?

Something to feed the hopper: a skid steer, loader, dump truck, or mixer all work. The hopper is sized for dump trucks and 4-inch minus material. We also need room to park the trailer, roughly 30 feet by 8 feet, near the placement area.

All questions

Ready to put the Beltline on your next job?

One call, one machine, one operator. Your crew stays on the build.

CallGet a quote